New Raybestos Brand Chassis Parts Released for Late Model Applications

Aug 20, 2012

Coverage for 3.5 Million Vehicles in Operation

Continuing to dominate the Aftermarket in first-to-market coverage… Raybestos® brand chassis parts – a member of the Affinia family of brands – has added ball joints, tie rod ends and sway bar frame bushings to the Raybestos chassis catalog for the following 2003-2012 models:

Ford Truck F150 (2010-2012)
• P/N 505-1472, Ball Joint – Lower

Chevy Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD (2011-2012)
• P/N 405-1239, Tie Rod End – Inner

Ford Truck F250/350 Super Duty (2011-2012) and F450/550 Super Duty (2005-2012)
• P/N 401-2373, Tie Rod End – Right Outer

Jeep Wrangler (2007-2011)
• P/N 410-1098, Tie Rod End – Right Inner

Lexus GX470 (2003-2009), Lexus GX460 (2011) and Toyota 4 Runner (2012)
• P/N 550-1703, Sway Bar Frame Bushing

Mazda Truck CX-9 (2007-2012)
• P/N 550-1724, Sway Bar Frame Bushing

Raybestos ball joints match the individual OE applications for the best possible steering control, ride quality and service life. Advanced Technology synthetic bearing designs hold tighter alignment tolerances for longer tire life, and the permanently attached polyurethane dust boots provide clean, consistent, long lasting performance.

Raybestos tie rod ends specifically match the ball and socket design for built-in strength and lasting durability. High strength steel forgings provide maximum stability, safety and service life.

Raybestos sway bark links use performance enhancing, low-friction designs and are cold forged for superior strength and stability. The full ball stud maximizes performance surface area… and with the best parts and labor guarantee in the industry… you can install the choice in chassis with 100% confidence.

For more information on Raybestos brand brake or chassis parts, visit or call 800-323-0354.


Raybestos® brand brake parts are produced by affiliated companies in Affinia’s Global Brake & Chassis Group, the leading manufacturer of braking systems in the transportation industry. The Raybestos brakes product line includes everything from brake drums to rotors, pads, shoes, calipers and hydraulic parts. Raybestos brand racing brakes are used by premier teams such as Joe Gibbs Racing, Roush Fenway Racing and Richard Petty Motorsports in NASCAR® competition. For more information about Raybestos brakes, visit

Affinia Group Inc. is an innovative global leader in the design, manufacture, distribution and marketing of industrial grade products and services, including extensive offerings of aftermarket parts for automotive and heavy-duty vehicles. With approximately $2.0 billion in annual revenue, Affinia has operations in North and South America, Europe and Asia. For more information, visit

Posted by Admin in News, Top Stories

2 thoughts on “New Raybestos Brand Chassis Parts Released for Late Model Applications

  1. I had a similar prlobem on the front axle of my ’90 ranger. It turned out that the flare on the end of the brake line was wrong. I had a bubble flare and it needed to be a double flare. The bubble flare looks like a bubble on the end of the line while the double flare is flatter. If you still have your old line compare the ends to be sure they are the same.

  2. The threads have to line up prtety much exact to get it brake line to screw in. If it looks a little crooked bend the line just a little and it should start. If there is no room to bend it you can take a box end wrench and put on the nut and bend it putting leverage on the wrench. Good luck.

Leave a Reply

Your email address will not be published. Required fields are marked *


+ one = 6

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>